Successful screening requires consideration of numerous factors, including the size of the experimental matrix and the volume of liquid required. High-throughput machines are needed as well. The 3 mm shaking throw of the Multitron Pro and Multitron Cell incubation shakers offer the perfect conditions for these applications, delivering screening results tailored to microorganisms and cell cultures, respectively.
Advantages of a 3 mm throw:
* Nearly four thousand batches in parallel
* Optimum oxygen introduction for relatively high cell densities and product yields
* Reduced liquid volume, which lowers the cost of culture media
* Evaporation effects eliminated through the use of direct steam humidification combined with suitable sample collection and sealing systems for microtiter or deep-well plates
Screening in Deep-Well-Platten As a result, researchers were able to obtain sufficient quantities of the target molecule from just 1 mL of liquid (deep-well plate) with nearly four thousand parallel batches. The larger culture vessels used up to now, by contrast, could only accommodate a few hundred batches. |
|
Clone Screening followed by Small Scale GMP Manufacturing The time for clone development can be reduced to 12 weeks using a three-stacked Multitron Pro with 3 mm shaking throw. The process starts in silico, and progresses through screening and clone selection in 96-deepwell plates up to five liter shaker flasks. With up to 7,680 data points (80 microtiter plates) per shaker it is possible to manipulate multiple factors while performing all experiments in triplicates. This allows for the generation of statistically valid data for design of experiments (DoE) while also considering quality by design (QbD) as stable clones are generated and optimized. |
|
More on 3 mm applications in Multitron incubation shakers
Multitron Pro and Multitron Cell can be used in combination with a large number of different trays, sample collection systems and sealing methods. We will be happy to help you with any questions you have about selecting the right tray.
Multitron Pro for microbial applications |
Multitron Cell for cell cultures |
Take the next step
Are you planning a screening study with relatively large volumes of liquid? Does your measurement and control technology have to meet unusual requirements? Then take a look at our bench-top reactors, such as the Multifors 2 for parallel cultures, or multiple Minifors 2 bioreactors connected via eve®.
Multifors 2 for microorganisms and cell cultures |
Minifors 2 for microorganisms |
Bioprocess Platform Software |
INFORS Multitron Cell多功能振荡培养箱
振幅:3/25/50mm可选/12.5,19,25,50mm振幅可调,温度范围:常温型 : 室温 +5℃ ~65℃,低温型:室温 -15℃ ~65℃
INFORS Multitron Standard标准振荡培养箱
温度范围:室温 +5~60℃或 4~60℃,温度稳定性为 ±0.1℃,温场均匀性达 ±0.2℃
小型中试原位灭菌生物反应器
Techfors-S Cell 是INFORS 中试型培养系统采用全电脑触摸屏控制器同时采用了新的设计,使得Techfors-S Cell 具有占地面积小、功能强、全自动操作等优点
大型生物反应系统
INFORS 可以提供反应总体积从 20L 到 300L,以及 1000L 以上的生物反应器,有 40 年以上的行业工作经验和遍布全球的成功案例,是您工厂生物反应系统的理想选择
小型中试原位灭菌发酵系罐
小型中试原位灭菌发酵罐-- 发酵试验的理想选择,Techfors-S Bacteria是INFORS中试型发酵罐,采用X-DDC控制器,同时采用了新的设计,具有占地面积小,功能强,全自动操作等优点。
大型发酵系统
INFORS 可以提供反应总体积从 20L 到 300L,以及 1000L 以上的生物反应器,有 40 年以上的行业工作经验和遍布全球的成功案例,是您工厂生物反应系统的理想选择
固态样品发酵罐
Terrafors Bacteria是INFORS公司为固体样品发酵研究的设备,获得瑞士创造发明大奖,适合固态样品、有机废弃物、天然或被污染固体样品的降解研究,也适合快速微生物评价,生物降解过程研究,优
Copyright © 22024 INFORS 京ICP备17022874号-3 京公网安备 11010502047771号